Tomtkarta

Property, parcel (skifte), joint unit, building and address

Why can a single Swedish property consist of several separate areas (skiften), what is a samfällighet, and why are buildings and addresses separate objects in the registers?

Written by Tomtkarta · OPL Consulting Oy · Sources checked on

One property can have several separate areas (skiften)

In Sweden’s Real Property Register, a fastighet (register unit) is the legal property as a whole, whereas a skifte — called a register-unit area (registerenhetsområde) in the geodata — is a single contiguous polygon on the map belonging to that property. A suburban house plot often consists of one area, while agricultural, forestry and archipelago properties very frequently consist of two, three or dozens of separate areas.

The separate areas of one fastighet can lie completely apart from each other, sometimes several kilometres away, yet they legally belong to the same fastighetsbeteckning. When you tap one area on Tomtkarta, the map highlights every area of the property, and the card separates the whole property’s combined calculated area from the single area you selected.

Fictional example: the property “SÖDERHAMN BERGA 2:14” consists of three areas — a 1,800 m² house plot by the road, a 42,000 m² forest area two kilometres north and a 250 m² boat-landing strip by the lake. Tapping the lakeside strip shows that you selected that specific area (250 m²), while the property’s headline calculated area sums all three areas together to 44,050 m².

Lantmäteriet — Fastighetsregistrets innehåll

Joint property units (samfälligheter) and other register units

A polygon on the map is not automatically a privately owned plot. Sweden’s property division contains both ordinary properties and joint property units (samfälligheter) — land or water owned jointly by several participating properties, such as shared access roads, green strips, wells or fishing waters. The dataset also includes special register-unit kinds such as joint fishing areas, railway areas, share properties and informally divided units.

A polygon shows only how land is partitioned into register units, not who owns it or which usage rights apply. If a samfällighet adjoins a property you are examining, you must check Lantmäteriet’s Real Property Register to see which properties hold shares in it and how it is managed.

In everyday Swedish the word “tomt” is often used loosely for a plot around a house, whereas legally the registered fastighet is distinct from the site concept used in planning and building law. On Tomtkarta, all core records follow the registered fastighet and its areas as published by Lantmäteriet.

Lantmäteriet — Fastighetsregistrets innehåll · Lantmäteriet — Fastighetsregistret

A location address (belägenhetsadress) is not the property

Location addresses (belägenhetsadresser) are assigned and maintained by municipalities and compiled into Lantmäteriet’s national address register. A belägenhetsadress is a located address point — typically placed at a building entrance, driveway or farmstead — and is a separate register object distinct from the property itself and its boundaries.

One property can carry multiple location addresses, such as an apartment block with several stairwells or a property with several entrances. Conversely, many properties carry no registered location address at all, particularly unbuilt land, forest areas, water areas and samfälligheter. Seeing no address means only that the address register links no address to the property.

Tomtkarta displays the active location addresses that Lantmäteriet’s address register links directly to the register unit. In some cases a mapped entrance point falls physically inside one property’s mapped boundary even though the address is registered to a different property; on the property page, such mapped entrances are listed separately with a link to the registered property.

Fictional example: a corner building complex under a single fastighetsbeteckning may have two entrances addressed as “Parkgatan 4” and “Kvarngatan 9”. Both addresses resolve to the same property on the map, but neither address on its own tells you who owns the building or where the legal boundary runs along the street.

Lantmäteriet — Fastighetsregistrets innehåll

Buildings on the map and on the property card

The building footprints on Tomtkarta come from Lantmäteriet’s vector product Byggnad Nedladdning, vektor. Buildings are separate objects in the geodata rather than attributes of the property boundary. In Lantmäteriet’s building dataset, a single building object may consist of multiple footprint parts, and its mapped outline can represent the roof edge, the façade or an illustrative position.

On Tomtkarta, each building is associated with a property via a point inside its largest mapped part, which also determines which area (skifte) is named on the card. The mapped building area is measured inside the published outline and is not the same figure as taxable floor space, usable floor area or building area defined for a permit application.

Lantmäteriet’s vector building delivery carries no construction year; the version date shown in the building’s map details records when the map record was updated. Recently built or demolished structures may be missing or remain visible until the municipality and Lantmäteriet update the building register. For authoritative records on buildings, permits and floor areas, consult the municipality.

Lantmäteriet — Byggnad Nedladdning, vektor · Lantmäteriet — Handbok Byggnad

This guide gives general information, not legal advice. Have the facts confirmed by the competent authority or a professional before you decide anything about a property.

Official sources and next steps

The sources below are official Swedish sources, in Swedish.

More guides

Show on the map